WebGate WebEye A10 Guia do Utilizador descarregar pdf (Página 25)

- 25 –

WebEye SPD User’s Guide

Auto IP Registration Function: Administrator may register one’s WebEye by enabling ‘Auto IP

Registration Function’. Registration process is that WebEye detects IP addresses from DHCP server

and informs the detected IP addresses to dynamic IP registration server. And the server updates

already registered information with new one. Please keep in mind that user have to enable ‘DHCP

Client Protocol’ at ‘Network Configuration’ page to have WebEye get dynamic IP addresses

automatically, when WebEye is installed on a network of dynamic IP address. With ‘Auto IP

Registration Function’ menu, a WebEye of fixed IP address can also be registered on the list.

Common users may access a certain WebEye by clicking on the name. By clicking on ‘Preview’,

users may see real-time view from WebEye without logging in WebEye.

Registration Interval: Dynamic IP

address is commonly used on xDSL,

ISDN or Cable Modem lines. To

maintain continuous connectivity, user

should reset the ‘Registration Interval’

shorter than the default value. Because

an IP is to be changed from time to time,

some user may not access by clicking on

a WebEye if actual information on

WebEye is changed from the registered

IP information on the dynamic IP

registration server.

A server to be used for Dynamic IP

registration should be installed with proper S/W, developed by WebGate Inc. If you do not run a

server for IP registration, keep the server’s name as default figure (webeye.to).

Access Token: If administrator sets a password here, people should key in the password to access

WebEye that is on dynamic IP registration service list. Administrator may prevent one’s WebEye

from being accessed by unknown users unnecessarily. However you should be cautious that if you

set it as 0, you can’t register at ‘User’s WebEye’.

5) Security Configuration

This page is to control accessibility to

one’s WebEye with IP addresses.

If ‘IP/Subnet Filtering Mode’ is on, only

the users whose PCs’ IP addresses are

registered to WebEye can access the

WebEye. Administrator may temporarily

disallow a registered user to access to

WebEye with a menu on the right side of

each IP address. Any IP addresses are to

be listed. If administrator inactivates

‘IP/Subnet Filtering Mode’, anyone can

access one’s WebEye through a Web

browser with any PC.

Administrator may restrict people to

receive images from one’s WebEye,

even though people accessed it. If

‘Image Encryption Mode’ is enabled and a pin number is assigned, people have to key in the

assigned pin number to see image after accessing WebEye image viewers.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 50 51

Comentários a estes Manuais

Sem comentários

WebGate WebEye A10 Guia do Utilizador Página 25

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras de segurança WebGate WebEye A10